Performing a wheelie on a bicycle or motorbike can amaze your friends, allow you to look cool, or help you evade hitting obstacles during a ride. Despite being among simple tactics to know, it can be challenging to master if your balance is off. The maneuvers can be pulled on almost anything with two wheels if you accelerate quickly, manage handlebars and balance yourself properly.
In this article, you’ll get insights into doing a wheelie on a bike. Read on to learn more!
Table of Contents
- 1 Steps for Doing a Wheelie on a Bike
- 1.1 Place Your Seat in the Middle
- 1.2 Your Gears Must Be Lowered As Much As Possible
- 1.3 Practice in A Huge Space
- 1.4 Begin Cycling Slowly
- 1.5 Put Your Stronger Foot on the Pedal at the 2 O’clock Position
- 1.6 Push the Pedal Hard to Attain a Backward Leaning
- 1.7 Adjust Your Weight Moderately to Determine Your Balance
- 1.8 Tap the Brakes at the Rear and Make the Front Wheel Straight
- 2 Conclusion
Steps for Doing a Wheelie on a Bike
No need to worry if you’re a newbie to bike riding or have no idea how to do wheelies; you’ve come to the right place. Here’s how to conduct a wheelie on your bike.
Place Your Seat in the Middle
If you overbalance, you’re likely to fall backward off your bike when trying a wheelie. It would help if your seat were moderately high or slightly higher or lower so that you can alter your balance and perform the trick more easily.
Once you become more adept at doing wheelies, the height of your seat can be adjusted to your desired level. Due to this, it might alter your balance and make controlling your bike more difficult.
Your Gears Must Be Lowered As Much As Possible
Initially, it isn’t necessary to travel at very high speeds when practicing how to perform wheelies. When you are doing it at a slower speed, doing a wheelie is much easier. Practice with low gears, between 1-2 and 1-3.
Like seat height, gear can also be adjusted at any time. Wheelies should be possible regardless of the gear you’re in. However, learning with lower gears is much easier.
Practice in A Huge Space
You will have an easier conducting the maneuvers if you practice in a big space. Practicing on a field or a park will help you to become proficient without making many round-turns.
It is effective to bike through local parks because they are large with grass, so you won’t sustain severe injuries in case of an accident. When you don’t have access to a large park, you may exercise on a road side or any other possible place to ride a bicycle safely.
Whenever possible, try practicing your workouts on an uphill slope. In this way, it will become more natural to lean backward and balance the wheelie.
Begin Cycling Slowly
Start pedaling your bicycle to gain some speed. To perform the maneuver with a low speed, you should aim for a pace just above the walking pace.
When you are more confident, you can do the maneuver while riding speedily. As you continue doing the maneuver, start slowly and gradually increase your speed.
Put Your Stronger Foot on the Pedal at the 2 O’clock Position
You can figure out which foot you are stronger with as you cycle. Keeping that foot on the pedal’s rotation till it is at the 2 o’clock position will allow you to push that pedal down quickly to accelerate.
To find out your stronger foot, you should do some maneuvers using each foot and determine it naturally
Whenever you feel yourself falling, you put forward the foot that you use as your dominant foot. If you stand up, identify the foot that can stop you from falling by getting someone to give you a light shove.
Push the Pedal Hard to Attain a Backward Leaning
When you pedal with your dominant foot, the bike will accelerate quickly, and the front wheel will rise. When you are ready, bend toward the backside and grab the handlebars to lift the front of your bike. After you’ve done this, you’ve accomplished your first maneuver.
Initially, do small wheelies and slowly raise the front wheel as you gain more confidence in the bike’s balance. You are much more likely to achieve a successful wheelie by undershooting it and landing back on the front wheel than if you overshoot it and fall backward on your bike.
Pull-on the rear brakes in case you sense that you are falling towards the back. You will be able to halt the movement of the back wheel and then set your feet back down safely.
Adjust Your Weight Moderately to Determine Your Balance
As soon as you raise the bicycle off the ground, balance the bike by adjusting yourself backward and forward. Trying to find the ideal position when riding a wheelie can take a lot of practice. If you keep practicing, eventually, you’ll get the hang of it and can hold your wheelies longer.
Whenever you sense that you’ll fall backward, tap your brakes to incline forwards. When you start to fall forward, do fast pedaling to accelerate and tilt your body a little backward.
Also, remember to keep your balance while moving sideways. Make sure you keep your weight evenly distributed on the bicycle to prevent you from tipping over. To prevent you from tilting one way, you should adjust yourself or turn the handlebars to the opposite side.
Tap the Brakes at the Rear and Make the Front Wheel Straight
When you lose balance, or you see a terrain change coming, or you think of stopping, you should hold the rear brakes to stop the wheelie. While you’re doing so, make sure your front wheel is in line with the entire bicycle. Your front wheel will sidetrack if it is a bit off, and you may fall.
Don’t land too hard on your fore wheel. The front suspension may provide some cushioning, but you aren’t willing to subject the wheels to undue stress.
Being adept at wheelies takes time, so you’ll need to practice plenty. The good news is that some bikes, such as mountain bikes, are built tough since they are designed to be used off-road. Buying one that is not well made may lead to the front wheel being bent if it is slammed so hard. Be aware of your safety when riding a bike and doing wheelies.